What are the characteristics of CNC bus processing machine?
The machine is equipped with three processing units of punching, cutting and folding, and the busbar can be punched, cut and folded separately or simultaneously through the operation screen or foot switch. The use of this machine high production efficiency, easy to use.
09
2023
/
10
Types of busbar processing machine
In the switchgear industry, it is sometimes necessary to bend the busbar from the edge, especially in electrical switches that require more connection space. The male elbow is a good solution to this problem, and it can also be easily installed on a professional busbar. Suitable for this type of bending the head is fixed on both sides of the copper bar to prevent any deformation of the surface. This head can bend the busbar 10*40 to 90 degrees and the busbar 50*45 to 45 degrees. Please continue to pay attention to the type of busbar making machine
09
2023
/
10
Operation of Bending Machine of Control Bus Processing Machine
The first thing you should do is to check and make sure that your brakes are properly calibrated. Verify that the plunger (Y axis) of the brake is correctly referenced, which means that it will repeat to the same Y position (or depth) every time it cycles. Also check to determine if it needs to be raised to avoid material deformation. By performing a test bend, you can see if the middle of the material is wider or narrower than the ends. If your 90 ° bend bends outward like a canoe in the middle, the material is deflected and convexity compensation is required.
09
2023
/
10
Maintenance and Maintenance of CNC Bus Processing Machine
1. Read the instructions carefully before using the bus processing machine, turn on the power supply, and determine the forward and reverse rotation of the motor. 2. Add anti-wear hydraulic oil (No. 46 above 0 degree and No. 32 below 0 degree).
09
2023
/
10
Use, maintenance and maintenance of portable bus processing machine
Before use, check whether the plug and power cord are normal, turn on the power, turn on the power switch (green on/red off), do not need to turn off the switch when working normally, please cut off the power when not working. This machine can be operated according to the limit device on the working table of the unit when punching and cutting. You can adjust the limit device, and then the workpiece rests on the limit device to ensure the size of punching or cutting.
10
2023
/
10
Working principle of three-in-one bus processing machine
1. The overall shape is bright in color, the surface is painted, and the phosphoric acid skin mold anti-rust treatment, wear-resistant and impact-resistant. 2. The working surface with mirror surface treatment, the desktop is ground and chrome plated, presenting a precise and stable working surface.
10
2023
/
10
CONTACT US
Manager Wang：+86-18706408573
Manager Zhen：+86-13256162785
Manager Guo：+86-13583150271
WhatsApp：+86-18706408573
E-mail：735912088@qq.com
Add：Room 1301, Building 5, Rongsheng Times International Plaza, No. 9 Beiyuan Street, Licheng District, Jinan City, Shandong Province
Copyright : Shandong Jingchuang CNC Equipment Co., Ltd. Powerby : 300.cn jinan2 SEO BUSINESS LICENSE
