11

How to control the CNC bus bending machine troubleshooting?

Release time :

2023-10-09 17:58

If you use the CNC busbar bending machine control and encounter problems that cannot be solved, please try to restart the machine. Like the computer locks up and must be shut down to solve the problem, sometimes it is necessary to "restart" your bending machine. Completely turn off the power to the machine (the entire bending machine, not just the control device), keep it off for 30 seconds to drain all the power to the circuit, and then restart the brake. This is not a common problem, but it is a simple way to repair the machine, so before you call a repair technician, this is one of the first problems to check.

For CNC busbar bending machines that have problems running the new program, the basic troubleshooting technique is to try the machine with the old program. We know that some operators decided that there must be a problem with the device when a new program suddenly failed to work, but it worked well with a different program the day before. If you encounter this situation, please return to the program you know works and check its performance before calling Jingchuang CNC technicians. If it works fine, then it is likely that you have a problem in the new program when you are making it. You need to go back and double-check what you did or delete it and start over. This is a very common problem because we all make mistakes.

Now more and more bending machines have touch screen controls, and the cleanliness of the screen will affect the performance of the controls. We found that many operators think there is a problem with their screen, and recalibrating and cleaning it when the screen gets dirty can solve the problem. People have natural oils in their fingers and dirty their hands when loading the busbar processor, all of which will leave a film under their control. You can regularly clean the touch screen with a soft cloth such as a microfiber cloth to avoid problems.

Previous Page

None

The use of three-in-one bus processing machine

Next Page

Previous Page

None

Next Page

The use of three-in-one bus processing machine

RELATED NEWS

What are the characteristics of CNC bus processing machine?

The machine is equipped with three processing units of punching, cutting and folding, and the busbar can be punched, cut and folded separately or simultaneously through the operation screen or foot switch. The use of this machine high production efficiency, easy to use.

2023/10/09 17:24

How to control the CNC bus bending machine troubleshooting?

Now more and more bending machines have touch screen controls, and the cleanliness of the screen will affect the performance of the controls. We found that many operators think there is a problem with their screen, and recalibrating and cleaning it when the screen gets dirty can solve the problem. People have natural oils in their fingers and dirty their hands when loading the busbar processor, all of which will leave a film under their control. You can regularly clean the touch screen with a soft cloth such as a microfiber cloth to avoid problems.

2023/10/09 17:58

The use of three-in-one bus processing machine

Before use, the product can be compressed for a few times to discharge the air in the fuel tank. This time, full air pressure is prohibited. For example, when using the cutting and arranging machine for air pressure, first set the "black" handle to the "cutting and arranging" state, and operate the foot pedal switch of the electric pump. when the electric pump starts to operate, you can see that the upper knife of the cutting and arranging machine moves downward at the same time, and turn off the foot pedal switch. When air pressure is prohibited, the upper knife stroke to the bottom of the lower knife; The punching machine also operates as above. When using the vertical bending machine, first change the "black" handle to the "bending row" state. If you want to bend flat, change to the flat bending die. If you want to bend vertically, change to the vertical bending die.

2023/10/10 09:46

Development of CNC System for Bus-bar Angle Milling Machine

Networking and intelligent: the network of numerical control system is based on the current Internet technology to realize the remote monitoring and maintenance of numerical control system, even remote operation and processing, scheduling and management of production workshop, etc. Intelligent is to achieve automated production and processing, reduce human intervention in the production and processing process and the pursuit of the goal, with the use of more advanced controllers and various sensors, can make the machine tool in more secure conditions to achieve intelligent machine tools. In the program design, the user tries to operate less, and make the operation interface more "fool", in line with the thinking habits of most people, to achieve intelligent operation and friendly man-machine interface.

2023/10/09 18:12