11

The use of three-in-one bus processing machine

Release time :

2023-10-10 09:46

1. Place the whole machine to the required workplace, and fix the product on the switch on the pulley at the bottom of the whole machine.

2. Fill oil into the electric pump oil tank, and the oil storage volume must be within the range above the oil window.

3. Confirm that the control valve handles on the operating platforms of the cutting and row machine, bending machine and punching machine are in the "oil return" status.

4. Connect the electric pump plug to the power supply and turn on the "green" button switch next to the operation platform.

5. Before use, the product can be compressed for a few times to discharge the air in the fuel tank. This time, full air pressure is prohibited. For example, when using the cutting and arranging machine for air pressure, first set the "black" handle to the "cutting and arranging" state, and operate the foot pedal switch of the electric pump. when the electric pump starts to operate, you can see that the upper knife of the cutting and arranging machine moves downward at the same time, and turn off the foot pedal switch. When air pressure is prohibited, the upper knife stroke to the bottom of the lower knife; The punching machine also operates as above. When using the vertical bending machine, first change the "black" handle to the "bending row" state. If you want to bend flat, change to the flat bending die. If you want to bend vertically, change to the vertical bending die.

6. On the operating platform, the "black" handle controls the corresponding (cutting and arrangement machine, bending and arrangement machine, punching machine). When using one of them, rotate the corresponding control handle to its corresponding text direction. After use, the control handle rotates to the "oil return" state.

7. When the product is not in use, the "black" handle is in the "oil return" state, close the "red" button switch next to the operating platform, and cut off the power supply.

Note: When processing the copper-aluminum row, if the hole is punched on the copper-aluminum row, the electric pump needs to relieve the pressure immediately after the hole is punched open. If the pressure is not relieved in time, the punching machine will still be in a high pressure state while punching the hole, which will cause the piston in the punching machine to be damaged. Cutting and bending machines are also the same.

Therefore, when the operator is operating, after the copper and aluminum row is processed, the electric pump must relieve the pressure in time. To avoid man-made damage.

8. Special tools shall be kept by special personnel.

Previous Page

How to control the CNC bus bending machine troubleshooting?

Development of CNC System for Bus-bar Angle Milling Machine

Next Page

Previous Page

How to control the CNC bus bending machine troubleshooting?

Next Page

Development of CNC System for Bus-bar Angle Milling Machine

RELATED NEWS

What are the characteristics of CNC bus processing machine?

The machine is equipped with three processing units of punching, cutting and folding, and the busbar can be punched, cut and folded separately or simultaneously through the operation screen or foot switch. The use of this machine high production efficiency, easy to use.

2023/10/09 17:24

How to control the CNC bus bending machine troubleshooting?

Now more and more bending machines have touch screen controls, and the cleanliness of the screen will affect the performance of the controls. We found that many operators think there is a problem with their screen, and recalibrating and cleaning it when the screen gets dirty can solve the problem. People have natural oils in their fingers and dirty their hands when loading the busbar processor, all of which will leave a film under their control. You can regularly clean the touch screen with a soft cloth such as a microfiber cloth to avoid problems.

2023/10/09 17:58

The use of three-in-one bus processing machine

Before use, the product can be compressed for a few times to discharge the air in the fuel tank. This time, full air pressure is prohibited. For example, when using the cutting and arranging machine for air pressure, first set the "black" handle to the "cutting and arranging" state, and operate the foot pedal switch of the electric pump. when the electric pump starts to operate, you can see that the upper knife of the cutting and arranging machine moves downward at the same time, and turn off the foot pedal switch. When air pressure is prohibited, the upper knife stroke to the bottom of the lower knife; The punching machine also operates as above. When using the vertical bending machine, first change the "black" handle to the "bending row" state. If you want to bend flat, change to the flat bending die. If you want to bend vertically, change to the vertical bending die.

2023/10/10 09:46

Development of CNC System for Bus-bar Angle Milling Machine

Networking and intelligent: the network of numerical control system is based on the current Internet technology to realize the remote monitoring and maintenance of numerical control system, even remote operation and processing, scheduling and management of production workshop, etc. Intelligent is to achieve automated production and processing, reduce human intervention in the production and processing process and the pursuit of the goal, with the use of more advanced controllers and various sensors, can make the machine tool in more secure conditions to achieve intelligent machine tools. In the program design, the user tries to operate less, and make the operation interface more "fool", in line with the thinking habits of most people, to achieve intelligent operation and friendly man-machine interface.

2023/10/09 18:12